• Read thoroughly and stick closely to the instructions and warnings.
• Before use, ensure that the mains voltage is the same as the voltage indicated on the data plate of the machine.
• Connect the grinder-doser only to 10 A sockets that are efficiently earthed.
• Always remove the plug from the socket before carrying out any maintenance or cleaning of the grinder-dosers.
• Singlephase models are supplied complete with cable and plug for connection to the socket.
• Any tampering with the grinder-doser or connections not complying with the above indications invalidate the manufacturer’s guarantee.
• Do not operate the grinder-doser without coffee in the hopper.
• Never tamper with the machines in any way.
• For any intervention on the machines, always apply only to the authorized service centre.
• Never pull the power cable to remove the plug from the socket.
• Only use the grinder-doser for the purposes it is meant for.
• Position the grinder-doser a minimum of 5 cm from walls so as to allow good ventilation.
• Keep the grinder-doser away from sinks and jets of water.
• Never leave the grinder-doser unguarded when switched on.
• This grinder-doser is not to be used by people with limited mental or physical abilities or by children less than aged 8, or by people lacking in the appropriate knowledge or experience, unless properly supervised by someone responsible for their safety.
• Children must be supervised to make sure they don’t play with the appliance.
• Cleaning and maintenance must not be done by children without supervision.
• Never switch on the grinder-doser if it seems to be faulty.
• Use only original accessories and parts.
• To avoid the danger of fire, never cover the grinder-doser.
• If the power cable is damaged, it must be replaced by the manufacturer, its technical department or a person with similar experience in order to avoid any risk.
• Unplug the grinder-doser from the mains when not in use for a long period.
• Let the grinder-doser cool down before moving it.
• In the interest of safety, the grinder-doser must always be considered connected and live.
• Take care, as the grinding blades may continue rotating for a short while even after the grinder-doser is switched off.
• Do not let liquids of any kind come into contact with the internal or external parts of the grinder-doser.
• Never put ground coffee in the hopper intended only for coffee beans.
• Do not tamper with the grinder-doser.
• Do not touch the grinder-doser with damp or wet hands or feet.
• The hopper must be fastened to the grinder-dosers grinding system by means of the relevant screw which must be inserted in the threaded hole located on the upper grinding blade holder and in the hole on the neck of the hopper.
• Make sure that the coffee outlet is free from any obstruction otherwise the appliance will stop.
• The manufacturer cannot be held responsible for bodily injury or damage to property if these regulations are not complied with.
• Operating temperature: -10°C +60°C – Storage temperature: -40°C +70°C
• USA & CANADA – duty cycle: 25s “ON” | 60s “OFF”
If the grinder-doser is to remain inactive for a long period, clean it carefully, wash and dry the hopper and leave it open.
ATTENTION: Moving parts.